Skip to content
NACE Rev. 2.1 23.12 Active Rev. 2.1 23.1 ↗
● Official Registry Data: 2026-11-19

23.12 — Shaping and processing of flat glass

NACE Rev. 2.1 23.12 (Shaping and processing of flat glass) classifies within economic division 23 (Cement manufacturing is directly covered by the **EU Carbon Border Adjustment Mechanism (CBAM Reg), linking EU/UN activity boundaries with US NAICS, UK SIC, and national regulatory obligations.

01 / Standard & Revision
NACE Rev. 2.1

Eurostat • v2.1

02 / Parent Hierarchy
23.1

Manufacture of glass and glass products

03 / Mapped Standards
12

NAICS 327211 • SIC 23120 • ISIC 2310

04 / Subclasses & Scope
4 TR Subclasses

MCC 5211

Active Rev. 2.1Supersedes NACE Rev. 2:
01 / OFFICIAL SCOPE & OPERATORS

Activity Scope, Operators & Exclusions

Who Uses This Code & Typical Business Models

  • Flat glass, tempered/insulated glazing, and ceramic/tile plants
  • Cement, ready-mix concrete, lime, plaster, and precast concrete works
  • Marble/granite slab cutting factories and mineral wool producers

This Class Includes

6
  • manufacture of bent, edgeworked, engraved, drilled or enamelled glass sheets or profiles
  • manufacture of toughened or laminated safety glass
  • manufacture of glass mirrors
  • manufacture of multiple-walled insulating glass and units of glass
  • manufacture of coated glass
  • surface treatment of flat glass

This Class Excludes (Cross-References)

2
02 / REGULATORY & TAX DOSSIER

Legislation, Licensing, Incorporation & Tax Framework

Div. 23 • Sec. C Law 6948 Industrial Reg.

Governing Statutes & Regulations

Industrial Registry Law No. 6948 Construction Products CE Regulation (305/2011) Environment Law (Silica/Dust Emissions) OHS Law No. 6331

Mandatory Permits, Licenses & Authorities

  • EIA Decision, Air Emission Permit, and Class 1/2 GSM Permit for cement/concrete/ceramic works
  • Mandatory CE Mark & Declaration of Performance (DoP) for structural materials
  • Silica dust exposure monitoring under Law 6331

Incorporation Route & Chamber Registration

EU NACE Rev. 2.1 Framework
Cement manufacturing is directly covered by the EU Carbon Border Adjustment Mechanism (CBAM Reg. 2023/956) and EU ETS; structural glass/tile/concrete require CPR CE Declarations of Performance.
United States (IRS / SBA / NAICS)
Maps to NAICS 327. Subject to OSHA Respirable Crystalline Silica (1910.1053) limits and EPA Portland Cement emission standards.
United Kingdom (Companies House / HMRC)
Governed by UK Construction Products Marking (UKCA/CE), UK ETS, and HSE Silica dust controls under UK SIC 23xxx.

VAT, Withholding & Statutory Incentives

  • Ready-mix concrete and cement deliveries quickly cross e-İrsaliye (electronic dispatch) thresholds.
  • Industrial Registry holders receive KVK Art. 32/7 and machinery VAT relief.

Cross-Border Regulatory Frameworks (EU / US / UK)

TR • Corporate & Tradesmen Registry

Chamber of Industry/Commerce + Exporters Union + Industrial Registry — Stonecutters Tradesmen Chamber for small workshops

EU / Global Technical Alignment

Cement manufacturing is directly covered by the EU Carbon Border Adjustment Mechanism (CBAM Reg. 2023/956) and EU ETS; structural glass/tile/concrete require CPR CE Declarations of Performance.

AUDIT & BOUNDARY CHECK

Classification Boundaries & Audit Risks

  • Extracting quarry stone sits in 08.11, whereas cutting/polishing marble slabs sits in 23.70.
  • Exporters of cement to the EU must track embedded emissions for EU CBAM filings.
03 / NATIONAL COMPLIANCE

Turkish 6-Digit NACE Subclasses & OHS Hazard Classes

44High
Turkish 6-Digit NACE Subclasses & OHS Hazard Classes
6-Digit CodeOfficial Turkish Activity DefinitionOHS HazardOffice / LocationGuide
23.12.01
Cam ayna imalatıVery Hazardous (Çok Tehlikeli)Fiziki İşyeri ve Belediye Ruhsatı ŞartInspect →
23.12.02
Sertleştirilmiş emniyet camı ve temperli düz cam imalatı (oto camı dahil)Very Hazardous (Çok Tehlikeli)Fiziki İşyeri ve Belediye Ruhsatı ŞartInspect →
23.12.03
Çok katlı yalıtım camları imalatıVery Hazardous (Çok Tehlikeli)Fiziki İşyeri ve Belediye Ruhsatı ŞartInspect →
23.12.04
Levha veya tabaka halinde işlenmiş cam imalatı (kavislendirilmiş, kenarları işlenmiş, gravür yapılmış, delinmiş, emaylanmış/sırlanmış veya başka bir şekilde işlenmiş, fakat çerçevelenmemiş veya monte edilmemiş olanlar) (optik camlar dahil)Very Hazardous (Çok Tehlikeli)Fiziki İşyeri ve Belediye Ruhsatı ŞartInspect →
04 / INTERNATIONAL CROSSWALK & MCC

Global Classification Passport

Verified structural and concordance mappings across EU, US, UK, UN, and national registries.

Payment Processing & ISO 18245 MCC Profile

Visa / Mastercard ISO 18245
MCC 5211
Low Risk Tier
Lumber and Building Materials Stores

Favorable acquiring category; keep delivery notes for bulky site-delivered orders.

05 / BOUNDARIES & COMPARISON

Critical Distinctions & Sibling Codes

Open Full Comparison Tool →
23.12 vs 23.11

23.11 — Manufacture of flat glass

Official NACE Rev. 2.1 code 23.11: manufacture of flat glass (e.g. cast, rolled, drawn or blown), surface ground or polished glass in sheets and sheets of float glass, opacified, flashed or having an absorbent, reflec...

06 / TAXONOMY TREE

Classification Hierarchy & Data Export

07 / FAQ

Frequently Asked Questions

What business activities and models fall under NACE Rev. 2.1 23.12?

23.12 (Shaping and processing of flat glass): manufacture of bent, edgeworked, engraved, drilled or enamelled glass sheets or profiles; manufacture of toughened or laminated safety glass; manufacture of glass mirrors. Typical operators: Flat glass, tempered/insulated glazing, and ceramic/tile plants; Cement, ready-mix concrete, lime, plaster, and precast concrete works.

What regulatory licensing and tax rules apply to 23.12 across EU, US, UK, or Turkey?

EU: Cement manufacturing is directly covered by the EU Carbon Border Adjustment Mechanism (CBAM Reg. 2023/956) and EU ETS; structural glass/tile/concrete require CPR CE Declarations of Performance. US: Maps to NAICS 327. Subject to OSHA Respirable Crystalline Silica (1910.1053) limits and EPA Portland Cement emission standards. UK: Governed by UK Construction Products Marking (UKCA/CE), UK ETS, and HSE Silica dust controls under UK SIC 23xxx.

What are the international classification equivalents and MCC code for 23.12?

Verified concordance for 23.12: US NAICS 2022: 327211 (Flat Glass Manufacturing), 327212 (Other Pressed and Blown Glass and Glassware Manufacturing), 327213 (Glass Container Manufacturing) • UK SIC 2007: 23120 (Shaping and processing of flat glass) • UN ISIC Rev. 5: 2310 • Payment MCC 5211 (Lumber and Building Materials Stores).

What was 23.12 under legacy NACE Rev. 2?

Under official Eurostat concordance, NACE Rev. 2.1 23.12 corresponds to NACE Rev. 2 23.12 (Shaping and processing of flat glass).

Which activities are excluded from NACE Rev. 2.1 23.12?

Official explanatory notes exclude: printing onto glass, see 18.12; manufacture of vehicle mirrors, see 29.32.