24.10 — Manufacture of basic iron and steel and of ferro-alloys
NACE Rev. 2.1 24.10 (Manufacture of basic iron and steel and of ferro-alloys) classifies within economic division 24 (Iron, steel, and aluminum exports into the EU fall directly under **EU CBAM (Reg), linking EU/UN activity boundaries with US NAICS, UK SIC, and national regulatory obligations.
Eurostat • v2.1
Manufacture of basic iron and steel and of ferro-alloys
NAICS 331110 • SIC 24100 • ISIC 2410
MCC 5051
Activity Scope, Operators & Exclusions
Who Uses This Code & Typical Business Models
- Integrated blast-furnace and electric-arc steelworks
- Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills
- Iron, steel, and non-ferrous metal foundries
This Class Includes
15- operation of blast furnaces, steel converters, rolling and finishing mills
- production of pig iron and spiegeleisen in pigs, blocks or other primary forms
- production of ferro-alloys
- production of ferrous products by direct reduction of iron and other spongy ferrous products
- production of iron of exceptional purity by electrolysis or other chemical processes
- remelting of scrap ingots of iron or steel
- production of granular iron and iron powder
- production of iron and steel in ingots or other primary forms
- production of semi-finished products of iron or steel
- manufacture of hot-rolled and cold-rolled flat-rolled products of iron or steel
- manufacture of hot-rolled bars and rods of iron or steel
- manufacture of hot-rolled open sections of iron or steel
- manufacture of sheet piling of iron or steel and welded open sections of iron or steel
- manufacture of railway track materials (unassembled rails) of iron or steel
- production of blast furnace gas
Also Includes
- manufacture of coated or uncoated flat-rolled steel products in coils or in straight lengths of a width of 600 mm or more by cold re-rolling of hot-rolled flat products or of steel rods
This Class Excludes (Cross-References)
1- cold drawing of bars, see 24.31
Legislation, Licensing, Incorporation & Tax Framework
Governing Statutes & Regulations
Mandatory Permits, Licenses & Authorities
- EIA Positive Decision, Class 1 GSM Operating Permit, and Air Emission Permit
- Non-hazardous Scrap Metal Recovery License for arc furnaces/smelters
- Mandatory Nuclear Authority (NDK) radiation portal monitors for scrap-melting mills
Incorporation Route & Chamber Registration
- EU NACE Rev. 2.1 Framework
- Iron, steel, and aluminum exports into the EU fall directly under EU CBAM (Reg. 2023/956) carbon declarations and EU Steel Safeguard quotas.
- United States (IRS / SBA / NAICS)
- Maps to NAICS 331. Imports face US Section 232 steel/aluminum tariffs; domestic mills fall under EPA NESHAP & OSHA furnace rules.
- United Kingdom (Companies House / HMRC)
- Requires EA Part A(1) IPPC environmental permits and complies with UK Steel Safeguard quotas under UK SIC 24xxx.
VAT, Withholding & Statutory Incentives
- Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.
- Eligible for Industrial Registry tax deductions and strategic investment incentives.
Cross-Border Regulatory Frameworks (EU / US / UK)
Chamber of Industry + Metals Exporters Union + Industrial Registry — JSC/LLC mandatory for industrial steelworks and foundries.
Iron, steel, and aluminum exports into the EU fall directly under EU CBAM (Reg. 2023/956) carbon declarations and EU Steel Safeguard quotas.
Classification Boundaries & Audit Risks
- Primary smelting/rolling/casting sits in Div. 24, whereas cutting/welding structural steel or CNC machining belongs in Div. 25.
- Misapplying 5/10 vs 7/10 VAT withholding on steel vs aluminum causes immediate tax assessments.
Turkish 6-Digit NACE Subclasses & OHS Hazard Classes
Global Classification Passport
Verified structural and concordance mappings across EU, US, UK, UN, and national registries.
Çelikten açık profil imalatı (sıcak haddeleme, sıcak çekme veya kalıptan çekme işlemlerinden daha ileri işlem görmemiş)
Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)
Sıcak haddelenmiş demir veya çelikten bar ve çubukların üretilmesi (inşaat demiri dahil)
Demir cevherinin doğrudan indirgenmesiyle elde edilen demirli ürünler ve diğer sünger demir ürünlerinin imalatı ile elektroliz veya diğer kimyasal yöntemlerle istisnai saflıkta demir üretilmesi
Çelikten demir yolu ve tramvay yolu yapım malzemesi (birleştirilmemiş raylar ile ray donanımı, aksamı, vb.) ile levha kazıkları (palplanş) ve kaynaklı açık profil imalatı
Pik demir ve manganezli dökme demir (aynalı demir/spiegeleisen) üretimi (külçe, blok, veya diğer birincil formlarda)
Ferro alaşımların imalatı (ferro manganez, ferro silisyum, ferro siliko manganez, ferro krom ve diğerleri)
Payment Processing & ISO 18245 MCC Profile
Visa / Mastercard ISO 18245Low-dispute B2B industrial supply compatible with commercial purchasing cards.
Critical Distinctions & Sibling Codes
24.20 — Manufacture of tubes, pipes, hollow profiles and related fittings, of steel
Official NACE Rev. 2.1 code 24.20: manufacture of seamless tubes and pipes of circular or non-circular cross section and of blanks of circular cross section, for further processing, by hot rolling, hot extrusion or by...
24.31 — Cold drawing of bars
Official NACE Rev. 2.1 code 24.31: manufacture of steel bars, rods, and solid sections of steel by cold drawing, grinding or cold-finishing
24.32 — Cold rolling of narrow strip
Official NACE Rev. 2.1 code 24.32: manufacture of coated or uncoated flat-rolled steel products in coils or in straight lengths of a width less than 600 mm by cold re-rolling of hot-rolled flat products or of steel rods
Classification Hierarchy & Data Export
- C Manufacturing
- 24 Manufacture of basic metals
- 24.1 Manufacture of basic iron and steel and of ferro-alloys
- 24.10 Manufacture of basic iron and steel and of ferro-alloys
Frequently Asked Questions
What business activities and models fall under NACE Rev. 2.1 24.10?
24.10 (Manufacture of basic iron and steel and of ferro-alloys): operation of blast furnaces, steel converters, rolling and finishing mills; production of pig iron and spiegeleisen in pigs, blocks or other primary forms; production of ferro-alloys. Typical operators: Integrated blast-furnace and electric-arc steelworks; Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills.
What regulatory licensing and tax rules apply to 24.10 across EU, US, UK, or Turkey?
EU: Iron, steel, and aluminum exports into the EU fall directly under EU CBAM (Reg. 2023/956) carbon declarations and EU Steel Safeguard quotas. US: Maps to NAICS 331. Imports face US Section 232 steel/aluminum tariffs; domestic mills fall under EPA NESHAP & OSHA furnace rules. UK: Requires EA Part A(1) IPPC environmental permits and complies with UK Steel Safeguard quotas under UK SIC 24xxx.
What are the international classification equivalents and MCC code for 24.10?
Verified concordance for 24.10: US NAICS 2022: 331110 (Iron and Steel Mills and Ferroalloy Manufacturing), 331221 (Rolled Steel Shape Manufacturing), 331222 (Steel Wire Drawing) • UK SIC 2007: 24100 (Manufacture of basic iron and steel and of ferro-alloys) • UN ISIC Rev. 5: 2410 • Payment MCC 5051 (Metal Service Centers and Offices).
What was 24.10 under legacy NACE Rev. 2?
Under official Eurostat concordance, NACE Rev. 2.1 24.10 corresponds to NACE Rev. 2 24.10 (Manufacture of basic iron and steel and of ferro-alloys).
Which activities are excluded from NACE Rev. 2.1 24.10?
Official explanatory notes exclude: cold drawing of bars, see 24.31.