Skip to content
TR NACE 6-Digit 24.10.08 Rev. 2.1
● Official Registry Data: 2026-11-19

24.10.08 — Demir cevherinin doğrudan indirgenmesiyle elde edilen demirli ürünler ve diğer sünger demir ürünlerinin imalatı ile elektroliz veya diğer kimyasal yöntemlerle istisnai saflıkta demir üretilmesi

EU Parent Class Manufacture of basic iron and steel and of ferro-alloys

Turkish 6-digit NACE subclass 24.10.08 (Manufacture of basic iron and steel and of ferro-alloys) falls under OHS hazard tier "high" (Law 6331), Industrial Registry Law No. 6948, and cross-maps to EU NACE Section C.

01 / OHS Hazard Class
Çok Tehlikeli

2-Yr Risk Review • Law 6331

02 / KOSGEB Support
Eligible

Up to 1,500,000 TL Reimbursable Dev Support + Establishment Grant

03 / Virtual Office
Physical Site Req.

Workplace Opening & Operation License Regulation (2005/9207) & Tax Law Art. 127

04 / Global Equivalent
EU 24.10

MCC 5051

01 / OFFICIAL SCOPE & OPERATORS

Activity Scope, Operators & Exclusions

Includes official parent class explanatory notes from NACE Rev. 2.1 24.10

Who Uses This Code & Typical Business Models

  • Integrated blast-furnace and electric-arc steelworks
  • Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills
  • Iron, steel, and non-ferrous metal foundries

This Class Includes

16
  • Demir cevherinin doğrudan indirgenmesiyle elde edilen demirli ürünler ve diğer sünger demir ürünlerinin imalatı ile elektroliz veya diğer kimyasal yöntemlerle istisnai saflıkta demir üretilmesi
  • operation of blast furnaces, steel converters, rolling and finishing mills
  • production of pig iron and spiegeleisen in pigs, blocks or other primary forms
  • production of ferro-alloys
  • production of ferrous products by direct reduction of iron and other spongy ferrous products
  • production of iron of exceptional purity by electrolysis or other chemical processes
  • remelting of scrap ingots of iron or steel
  • production of granular iron and iron powder
  • production of iron and steel in ingots or other primary forms
  • production of semi-finished products of iron or steel
  • manufacture of hot-rolled and cold-rolled flat-rolled products of iron or steel
  • manufacture of hot-rolled bars and rods of iron or steel
  • manufacture of hot-rolled open sections of iron or steel
  • manufacture of sheet piling of iron or steel and welded open sections of iron or steel
  • manufacture of railway track materials (unassembled rails) of iron or steel
  • production of blast furnace gas

Also Includes

  • manufacture of coated or uncoated flat-rolled steel products in coils or in straight lengths of a width of 600 mm or more by cold re-rolling of hot-rolled flat products or of steel rods

This Class Excludes (Cross-References)

1
02 / REGULATORY & TAX DOSSIER

Legislation, Licensing, Incorporation & Tax Framework

Div. 24 • Sec. C Law 6948 Industrial Reg.

Governing Statutes & Regulations

Industrial Registry Law No. 6948 Environment Law No. 2872 (Class 1 GSM / Heavy Emissions) OHS Law No. 6331 (Very Hazardous) Turkish VAT Metal Withholding Rules

Mandatory Permits, Licenses & Authorities

  • EIA Positive Decision, Class 1 GSM Operating Permit, and Air Emission Permit
  • Non-hazardous Scrap Metal Recovery License for arc furnaces/smelters
  • Mandatory Nuclear Authority (NDK) radiation portal monitors for scrap-melting mills

Incorporation Route & Chamber Registration

Capital Company (LTD / A.Ş.) & Chamber
Chamber of Industry + Metals Exporters Union + Industrial Registry
Sole Proprietor / Freelancer / Tradesman
JSC/LLC mandatory for industrial steelworks and foundries.

VAT, Withholding & Statutory Incentives

Physical Premises & Municipal Permit Mandatory
  • Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.
  • Eligible for Industrial Registry tax deductions and strategic investment incentives.

Cross-Border Regulatory Frameworks (EU / US / UK)

EU • NACE Rev. 2.1

Iron, steel, and aluminum exports into the EU fall directly under EU CBAM (Reg. 2023/956) carbon declarations and EU Steel Safeguard quotas.

US • NAICS / IRS / SBA

Maps to NAICS 331. Imports face US Section 232 steel/aluminum tariffs; domestic mills fall under EPA NESHAP & OSHA furnace rules.

UK • Companies House / HMRC

Requires EA Part A(1) IPPC environmental permits and complies with UK Steel Safeguard quotas under UK SIC 24xxx.

AUDIT & BOUNDARY CHECK

Classification Boundaries & Audit Risks

  • Primary smelting/rolling/casting sits in Div. 24, whereas cutting/welding structural steel or CNC machining belongs in Div. 25.
  • Misapplying 5/10 vs 7/10 VAT withholding on steel vs aluminum causes immediate tax assessments.
03 / NATIONAL COMPLIANCE

OHS Hazard Rules, KOSGEB & Subclasses

6331 Occupational Health & Safety (OHS)

Very Hazardous (Çok Tehlikeli)

Strictest Law 6331 tier: requires Class A OHS Specialist and workplace physician from employee #1, other health personnel at 10+ staff, annual training, and mandatory vocational qualification certificates under Art. 17.

KOSGEB Entrepreneurship & Grants

Up to 1,500,000 TL Reimbursable Dev Support + Establishment Grant

Priority NACE division under KOSGEB guidelines: eligible for both the initial establishment grant and up to 1.5M TL (1.65M TL for young/female founders) in Business Development Support covering equipment, software licenses, and payroll. Completion of KOSGEB online entrepreneurship training prior to registration is mandatory.

KOSGEB Entrepreneur Support Program Guidelines (Manufacturing / Telecom / ICT / R&D)

Virtual Office & Tax Inspection

Physical Premises & Municipal Permit Mandatory

A virtual or residential-only address cannot satisfy tax inspection or municipal licensing. Physical premises with occupancy permit, fire safety clearance, and Sanitary or Non-Sanitary Establishment (GSM) license are mandatory.

Leasing physical premises from an individual landlord triggers 20% withholding tax (GVK Art. 94/5); corporate landlords instead issue invoices with 20% deductible VAT.

Statutory Duties under Turkey OHS Law No. 6331

Very Hazardous (Law 6331)
Statutory Duties under Turkey OHS Law No. 6331
Statutory DutyFrequency / RequirementLegal Basis
Risk Assessment RenewalAt least every 2 yearsRisk Assessment Reg. Art. 12
Emergency Plan & DrillPlan every 2 yrs (1 support per 30 staff) + annual drillEmergency Reg. Art. 11, 14
Staff Basic OHS TrainingMin. 16 hours annuallyOHS Training Reg. Art. 6, 11
Periodic Health ExamAnnually (physician 15 min/staff/mo; nurse at 10+ staff)Workplace Physician Reg. Art. 9, 12
Class A Specialist & MYKClass A Specialist (40 min/staff/mo) + mandatory Art. 17 vocational certsLaw 6331 Art. 6, 17
Under Law 6331 Art. 17, workers lacking accredited vocational competence (MYK) or heavy-work medical clearance cannot begin duties; inspectors may order work stoppage.
04 / INTERNATIONAL CROSSWALK & MCC

Global Classification Passport

Verified structural and concordance mappings across EU, US, UK, UN, and national registries.

Payment Processing & ISO 18245 MCC Profile

Visa / Mastercard ISO 18245
MCC 5051
Low Risk Tier
Metal Service Centers and Offices

Low-dispute B2B industrial supply compatible with commercial purchasing cards.

05 / BOUNDARIES & COMPARISON

Critical Distinctions & Sibling Codes

Open Full Comparison Tool →
24.10.08 vs 24.10.03

24.10.03 — Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)

Turkey 6-digit NACE subclass 24.10.03 — Manufacture of basic iron and steel and of ferro-alloys (Demir ve çelikten sıcak veya soğuk çekilmiş yassı hadde ürünleri imalatı (demir veya çelik alaşımlı levha, şerit, sac, teneke sac, vb. dahil)). OHS Law 6331 classification: Very Hazardous (Çok Tehlikeli).

06 / TAXONOMY TREE

Classification Hierarchy & Data Export

  1. 24.10.08 Demir cevherinin doğrudan indirgenmesiyle elde edilen demirli ürünler ve diğer sünger demir ürünlerinin imalatı ile elektroliz veya diğer kimyasal yöntemlerle istisnai saflıkta demir üretilmesi
07 / FAQ

Frequently Asked Questions

What business activities and models fall under TR NACE 6-Digit 24.10.08?

24.10.08 (Demir cevherinin doğrudan indirgenmesiyle elde edilen demirli ürünler ve diğer sünger demir ürünlerinin imalatı ile elektroliz veya diğer kimyasal yöntemlerle istisnai saflıkta demir üretilmesi): Demir cevherinin doğrudan indirgenmesiyle elde edilen demirli ürünler ve diğer sünger demir ürünlerinin imalatı ile elektroliz veya diğer kimyasal yöntemlerle istisnai saflıkta demir üretilmesi; operation of blast furnaces, steel converters, rolling and finishing mills; production of pig iron and spiegeleisen in pigs, blocks or other primary forms. Typical operators: Integrated blast-furnace and electric-arc steelworks; Aluminum, copper, zinc, and precious-metal smelting/rolling/extrusion mills.

What regulatory licensing and tax rules apply to 24.10.08 across EU, US, UK, or Turkey?

Strictest Law 6331 tier: requires Class A OHS Specialist and workplace physician from employee #1, other health personnel at 10+ staff, annual training, and mandatory vocational qualification certificates under Art. 17. Workplace status: Physical Premises & Municipal Permit Mandatory. Tax/Incentives: Iron/steel deliveries trigger 5/10 VAT withholding and aluminum/copper/zinc profiles/ingots trigger 7/10 VAT withholding under Turkish VAT law.

What are the international classification equivalents and MCC code for 24.10.08?

Verified concordance for 24.10.08: Payment MCC 5051 (Metal Service Centers and Offices).

Which activities are excluded from TR NACE 6-Digit 24.10.08?

Official explanatory notes exclude: cold drawing of bars, see 24.31.